LH Dottie
#10 Anchor Kit Phillips/Slotted with #122 Anchor, 100 pack
#10 Anchor Kit Phillips/Slotted with #122 Yellow Anchor, 10 pack
$19.90
$18.91
#10 Anchor Kit Phillips/Slotted with #22 Anchor, 10 pack
#10 Anchor Kit Phillips/Slotted with #22 Red Anchor, 10 pack
$19.90
$18.91
#12 Anchor Kit Phillips/Slotted with #122 Anchor, 10 pack
#12 Anchor Kit Phillips/Slotted with Green Wing Anchor, 10 pack
$19.90
$18.91
#4-6-8 Tapered Anchors, 100 pack
Plastic Anchors: Tapered with Wings. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
$3.84
$3.65
#6 x 1" Drywall Screws, Phillips
Coarse thread Bugle Head drywall screws (Wood Rockets) are self piercing and are used for drywall, particle board and wood. The course threads provide for a quicker installation.
$19.90
$18.91
#6 x 1" Drywall Screws, Phillips
Coarse thread Bugle Head drywall screws (Wood Rockets) are self piercing and are used for drywall, particle board and wood. The course threads provide for a quicker installation.
$4.61
$4.38
#6 x 1-1/4" Drywall Screws, Phillips
Coarse thread Bugle Head drywall screws (Wood Rockets) are self piercing and are used for drywall, particle board and wood. The course threads provide for a quicker installation.
$21.99
$20.89
#6 x 1-5/8" Drywall Screws, Phillips
Coarse thread Bugle Head drywall screws (Wood Rockets) are self piercing and are used for drywall, particle board and wood. The course threads provide for a quicker installation.
$6.04
$5.74
#6 x 1-5/8" Drywall Screws, Phillips
Coarse thread Bugle Head drywall screws (Wood Rockets) are self piercing and are used for drywall, particle board and wood. The course threads provide for a quicker installation.
$25.99
$24.75
#6 x 1.25" Drywall Screws, Phillips
Coarse thread Bugle Head drywall screws (Wood Rockets) are self piercing and are used for drywall, particle board and wood. The course threads provide for a quicker installation.
$5.05
$4.80
#6-8-10 Tapered Anchors, 100 pack
Plastic Anchors: Tapered with Wings. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
$3.95
$3.75
#8-#10 Assorted Self Tapping Screw Kit, Phillips
#8-#10 Self Drilling Screw Kit Phillips Head 330 Assorted Self Drilling Phillips Head Screws: 75 - 8 x 1/2"50 - 8 x 3/4"40 - 8 x 1"75 - 10 x 1/2"50 - 10 x 3/4"40 - 10 x 1"1 -...
$38.05
$36.15
#8-10-12 Tapered Anchors, 100 pack
Plastic Anchors: Tapered with Wings. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
$4.50
$4.28
1/8" High Speed Drill Bit, 4 pack
1/8" x 2 3/4" Steel High Speed Drill Bits, 4 pack
$7.58
$7.21
6-32 Machine Screw Kit Phillips/Slotted Round Head, 100 pack
6-32 Machine Screw Kit with Phillips/Slotted Round Head. Made of steel and are zinc plated. 100 pack.
$24.41
$23.19
Concrete Hex Head Screw, 3/16 x 1-13/4", 100 pack
Size: 3/16 x 1-3/4 in.Drive: Hexagonal Head SlottedBit Size: 1/4 in.Drill Size: 5/32 x 3-1/2 in. Quantity: 100
$45.86
$43.57
Drywall Screw, Fine Thread, #6 x 1", 100 pack
Fine thread Bugle Head drywall screws are self piercing and are used for wood, drywall and aluminum. Length is determined from the top of the fastener head.
$4.61
$4.38
Drywall Steel Screw, Fine Thread, #6 x 1", 500 pack
Fine thread Bugle Head drywall screws are self piercing and are used for wood, drywall and aluminum. Length is determined from the top of the fastener head.
$19.90
$18.91
Flat Head Wood Screw, #6 x 1", 100 pack
Flat head wood screws provide a flush surface. Length is determined from the top of the fastener head.
$7.03
$6.68
Flat Head Wood Screw, #6 x 3/4", 100 pack
Flat head wood screws provide a flush surface. Length is determined from the top of the fastener head.
$6.48
$6.16
Flat Head Wood Screw, #8 x 1.5", 100 pack
Flat head wood screws provide a flush surface. Length is determined from the top of the fastener head.
$9.12
$8.67
Flat Head Wood Screw, #8 x 3/4", 100 pack
Flat head wood screws provide a flush surface. Length is determined from the top of the fastener head.
$7.47
$7.10
Flat Head Wood Screw, #8 x 3/4", 100 pack
Flat head wood screws provide a flush surface. Length is determined from the top of the fastener head.
$7.03
$6.68
Flat Steel Fender Washer, #1/4", 100 pack
Fender washers are for general purpose applications. Provides a large load bearing surface.
$9.23
$8.77
Flat Steel Lock Washer, #1/4", 100 pack
Lock washers provide tight locking of screws and bolts.
$3.29
$3.12
Flat Steel Washer, #1/2", 50 pack
Flat Washers are used to increase the surface area of fasteners, in order to evenly distribute the force applied when tightening them to a surface. They are also used to prevent loosening due to vibration, to stop the bolt or...
$24.96
$23.49
Flat Steel Washer, #1/4", 100 pack
Flat Washers Steel - general use; Stainless Steel - corrosion and chemical resistant; Solid Brass - good in water and salt air; Silicon Bronze - harder than brass, marine use and high resistance to extreme temperatures; Hard Alloy - use...
$6.04
$5.74
Flat Steel Washer, #3/8", 100 pack
Flat Washers are used to increase the surface area of fasteners, in order to evenly distribute the force applied when tightening them to a surface. They are also used to prevent loosening due to vibration, to stop the bolt or...
$11.21
$10.55
Nylon Toggle Hollow Wall Anchors, #10 x 1.5", 100 pack
Nylon Toggle Hollow Wall Anchors, #10 x 1.5", 100 pack. Fits drywall up to 5/8"
$39.37
$37.40
Nylon Toggle Hollow Wall Anchors, #8 x 1.5", 100 pack
Nylon Toggle Hollow Wall Anchors, #8 x 1.5", 100 pack. Fits drywall up to 1/2"
$35.63
$33.85
Nylon Wall Driller Anchor Kit, #6, 10 pack
#6 Anchor Kit Wall Driller (Nylon) Includes Phillips Screw (#6 x 1"), 10 pack
$22.10
$21.00
Nylon Wall Driller Anchor Kit, #8, 10 pack
#8 Anchor Kit Wall Driller (Nylon) Includes Phillips Screw (#8 x 1"), 10 pack
$27.38
$26.02
Nylon Wall Driller Anchors, #6, 100 pack
#6 Wall Driller Anchors, Nylon
$38.38
$36.47
Nylon Wall Driller Anchors, #8, 100 pack
Nylon Wall Driller Anchors, #8, 100 pack
$38.71
$36.77
Pan Head Sheet Metal #10 x 1" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$8.46
$8.04
Pan Head Sheet Metal #10 x 1.5" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$11.10
$10.55
Pan Head Sheet Metal #10 x 1/2" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$6.48
$6.16
Pan Head Sheet Metal #10 x 3/4" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$7.25
$6.89
Pan Head Sheet Metal #6 x 1" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$5.82
$5.53
Pan Head Sheet Metal #6 x 1.5" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$7.03
$6.68
Pan Head Sheet Metal #6 x 1/2" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$4.50
$4.28
Pan Head Sheet Metal #6 x 3/4" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$4.94
$4.70
Pan Head Sheet Metal #8 x 1" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$6.59
$6.26
Pan Head Sheet Metal #8 x 1.5" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$8.90
$8.46
Pan Head Sheet Metal #8 x 3/4" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$6.37
$6.05
Pan Head Sheet Metal #8x 1/2" Screw, 100 pack
Pan head combo (slotted/Phillips) sheet metal screws will tap their own mating threads when driven into preformed holes in metal. Length is determined from the base of the fastener head.
$5.38
$5.12
Phillips Pan Head Self Tapping Screws, #6 x 1", 100 pack
Self drilling phillips pan head screws drill a hole and tap threads in one operation. The drilling operation removes metal and can be used with heavier gauge metals. Length is determined from the base of the fastener head.
$10.66
$10.13
Phillips Pan Head Self Tapping Screws, #6 x 1/2", 100 pack
Self drilling phillips pan head screws drill a hole and tap threads in one operation. The drilling operation removes metal and can be used with heavier gauge metals. Length is determined from the base of the fastener head.
$8.68
$8.25
Phillips Pan Head Self Tapping Screws, #6 x 3/4", 100 pack
Self drilling phillips pan head screws drill a hole and tap threads in one operation. The drilling operation removes metal and can be used with heavier gauge metals. Length is determined from the base of the fastener head.
$9.67
$9.19
Phillips Pan Head Self Tapping Screws, #8 x 1", 100 pack
Self drilling phillips pan head screws drill a hole and tap threads in one operation. The drilling operation removes metal and can be used with heavier gauge metals. Length is determined from the base of the fastener head.
$11.10
$10.55